TruDesign Domed Skin Fitting
£7.95 - £20.95
Suitable for underwater use, TruDesign range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.
They also comply with ABYC H-27 500Lb standard when used in conjunction with the TruDesign ABYC collar.
Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings.
TruDesign Skin Fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings.
When used in below waterline applications, a Ball Valve should be directly connected for safety and compliance to relevant marine standards.
Trudesign Skin Fitting (Thru Hull) Installation Instructions
Looking to make a TruDesign Seacock? You will need: a skin fitting, a ball valve, a load bearing collar (gives ABYC H-27 compliance) and a threaded hose connector. See all the compatible products below. Or our How to Create a TruDesign Composite Seacock Guide.
