TruDesign Vented Loop

The Aquavent® has been designed and manufactured for use in Marine applications, specifically marine toilet applications. Vented loops are commonly used for inlet and discharge pipes on toilet installations below the water line.

The Aquavent® is moulded in glass filled Nylon 6 Polymer with a silicon bleed valve. The bleed valve allows air into the system to stop syphoning yet seals effectively when water or fluid pass through. The advantage with these vented loops is that the internal diameter is the same throughout the bend so there is no restriction.

The Aquavent® can be used as a holding tank vent by replacing the bleed valve fitting with a tube that is connected to a deck level vent.