Rule Lopro Auto 900Gph Bilge Pump

Features:

• The Rule LoPro LP900S Automatic Bilge Pump is a low profile pump with 900 gallons per hour capacity.
• Designed for tight spaces, the height of the pump is only 2-1/4″.
• It features a threaded discharge nozzle to which you can attach either the included straight or 90° fitting.
• Multiple ports are available for this pump.
• All ports are included.
• 3/4″ Straight.
• 3/4″ Right angle.
• 1″ and 1-1/8″.
• It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of water.
• The entire discharge body swivels up to 180° for ease of installation.
• The hose can also swivel 360° for better routing.
• The LoPro LP900S has (2) Automated settings, enabling the pump to turn on when the water reaches either 2″ or 1.3″.
• High or Low Water Sensing Mode:
• The pump starts when water reaches a 2″ level.
• By turning the motor cartridge upside down, the sensor is set at 1.3″.
• Electronic Automatic Mode:
• The pump automatically turns on every 2.5 minutes to check for water, and if it’s detected the pump stays on until the water is gone.

Specifications:

• Voltage: 12 Volt DC
• Flow: 900 GPH open flow at 13.6 Volts
• Amp Draw: 4 Amp approx
• Protection: TCO
• Port Configuration: 3/4″, 1″, 1-1/8″ Straight, 90 degree 3/4″
• Backflow preventer valve can be used with straight fittings
• Dimension:
• Height: 2.3″
• Length: 9.3″
• Width: 2.3″