Spinlock PXR Race Cleats
£32.95 - £59.95
Compact roller action cam cleat for easy release of high performance control lines.
Key Features
- Fast precise control for hand tensioned lines
- Roller action ensures easy release under high load
- Hard anodised alloy cam and base
- Ideal for high performance lines
- Micro size for small diameters
- Three stage release control switch
- Ideal for single line spinnaker hoist systems
- Resists accidental re-cleating
Specifications & Dimension Diagrams
2 – 6mm
Lines: 2mm – 6mm (3/32″ – 1/4″)
Loads up to 140kg (308lbs)
Weight: 43g (1.5oz)
Fasteners Required: 2 x M4 (5/32″) CSK Head (not supplied)
8 – 10mm
Lines: 8mm – 10mm (5/16″ – 3/8″)
Loads up to 200kg (440lbs)
Weight: 84g (2.9oz)
Fasteners Required: 2 x M5 (3/16″) CSK Head (not supplied)
2 – 6mm
Lines: 2mm – 6mm (3/32″ – 1/4″)
Loads up to 140kg (308lbs)
Weight: 53g (1.9oz)
Fasteners Required: 2 x M4 (5/32″) CSK Head (not supplied)
Retro Fit ‘T’ – Matched hole centres allow direct replacement of traditional cam cleats with PXR
PXR0206/T – 27mm (1 1/16”) hole centres – for upgrading dinghy control line cam cleats
8 – 10mm
Lines: 8mm – 10mm (5/16″ – 3/8″)
Loads up to 200kg (440lbs)
Weight: 101g (3.5oz)
Fasteners Required: 2 x M5 (3/16″) CSK Head (not supplied)
Retro Fit ‘T’ – Matched hole centres allow direct replacement of traditional cam cleats with PXR.
PXR0810/T – 38mm (1 1/2”) hole centres – for upgrading main sheet swivel cleats and traveller systems on dinghies, keelboats and yachts, and upgrading cam cleats on downhauls, vang and backstay control
2 – 6mm
Lines: 2mm – 6mm (3/32″ – 1/4″)
Loads up to 140kg (308lbs)
Weight: 97g (3.4oz)
Fasteners Required: Bracket mount
Vertical Pivot ‘VP’ (2-6mm version only)
- Pivoting sheave and cleat with ultra compact design
- Mount centrally for feeding control lines out to the sides
- Mount under boom for outhaul and gnav controls
- Mount at mast base for catamaran downhauls and vangs
- Easily detached
- Accepts Harken sheave
2 – 6mm
Lines: 2mm – 6mm (3/32″ – 1/4″)
Loads up to 140kg (308lbs)
Weight: 77g (2.7oz)
Fasteners Required: 3 x M5 (3/16″) CSK Head (not supplied)
PXR0206/SW for single cleat control of jib sheets and dinghy vangs. Preferred by dinghy builders for single line spinnaker hoist systems.
Same footprint as traditional swivel cam cleats.
8 – 10mm
Lines: 8mm – 10mm (5/16″ – 3/8″)
Loads up to 200kg (440lbs)
Weight: 124g (4.3oz)
Fasteners Required: 3 x M5 (3/16″) CSK Head (not supplied)
PXR0810/SW for bigger boat swivel cam cleat control applications.
Same footprint as traditional swivel cam cleats.
