TruDesign 120 Degree Hose Tail Male Thread
£ 6.95 - £ 13.95
TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the material provide dramatic strength, stiffness, toughness, and dimensional stability. TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tails are designed for twin hose clamps, and to never crush.
Looking to make a TruDesign Seacock? You will need: a skin fitting, a ball valve, a load bearing collar (gives ABYC H-27 compliance) and a threaded hose connector. See all the compatible products below. Or our How to Create a TruDesign Composite Seacock Guide.
£ 34.95 - £ 74.95
£ 17.95 - £ 20.95
£ 7.95 - £ 20.95
£ 8.95 - £ 12.95
£ 14.95 - £ 21.95
£ 2.50 - £ 8.95
£ 4.95 - £ 13.95
£ 6.95 - £ 13.95
Part Number
Size
Port Solent
Warehouse
99711573
1" BSP - 25mm Hose
4
6
99711597
1 1/4" BSP - 32mm Hose
1
3
99711603
1 1/4" BSP - 38mm Hose
2
0
99711610
1 1/2" BSP - 38mm Hose
3
6
99711627
2" BSP - 50mm Hose
1
0